Low Tension Methods for Fractured Resources
Abstract/Contents
- Abstract
- Water flooding typically recovers about 50% of the original oil in place leaving much oil in the reservoir. Recovery efficiency in fractured reservoirs can be dramatically lower in comparison to conventional reservoirs because water channels selectively from injector to producer leaving considerable oil within the matrix and uncontacted by injected water. An enhanced recovery process is needed to access such oil held in the reservoir matrix. Addition of aqueous surfactants to injection water dramatically reduces oil/water interfacial tension and surfactant may adsorb to oil-wet rock surfaces inducing a shift in wettability that improves the imbibition of water. At the pore level, capillary forces are responsible for oil trapping and generally dominate over viscous and gravitational forces. Because of the reduction in interfacial tension between oil and water with the addition of surfactant, the role of capillary forces on fluid flow can be minimized. When gravity parameters are large enough to give a Bond number (ratio of gravity to capillary forces) greater than 10, gravitational forces become more dominant and oil held with rock matrix by capillarity may be released as a result of buoyancy. In this work, we use experiments conducted in two-dimensional micromodels to investigate the effect of gravity at low interfacial tension. The micromodels have the geometrical and topological characteristics of sandstone and the network is etched into silicon. Pore-level mechanics are observed directly via a reflected-light microscope. A screening study of sulfonate and sulfate surfactants was conducted to choose an appropriate system compatible with the light crude oil (27¢ªAPI). A variety of flow behavior through the microscope is investigated including forced and spontaneous imbibition. Results are illustrated via pore-level photo and image analysis of whole micromodel pictures. Forced displacements are conducted at realistic flow rates to maintain a 1 m/day Darcy velocity and at surfactant concentrations of 0.9% to 1.25%. Forced displacement with a horizontal or vertical positioning of the micromodel yields dramatic improvement of recovery for surfactant injection cases. All the oil retained after a waterflood was recovered by tertiary injection of surfactant solution. In comparison, about 25% oil saturation remained after a waterflood.
Description
| Type of resource | text |
|---|---|
| Date created | June 2009 |
Creators/Contributors
| Author | Alshehri, Amar Jaber |
|---|---|
| Primary advisor | Kovscek, Anthony R. |
| Advisor | Castanier, Louis |
| Degree granting institution | Stanford University, Department of Energy Resources Engineering |
Subjects
| Subject | School of Earth Energy & Environmental Sciences |
|---|---|
| Genre | Thesis |
Bibliographic information
Access conditions
- Use and reproduction
- User agrees that, where applicable, content will not be used to identify or to otherwise infringe the privacy or confidentiality rights of individuals. Content distributed via the Stanford Digital Repository may be subject to additional license and use restrictions applied by the depositor.
Preferred citation
- Preferred Citation
- Alshehri, Amar Jaber. (2009). Low Tension Methods for Fractured Resources. Stanford Digital Repository. Available at: https://purl.stanford.edu/yk739fb1298
Collection
Master's Theses, Doerr School of Sustainability
View other items in this collection in SearchWorksContact information
- Contact
- brannerlibrary@stanford.edu
Also listed in
Loading usage metrics...