Experimental and Numerical Investigation of Oil Recovery from Bakken by Miscible CO2 Injection
Abstract/Contents
- Abstract
- Unconventional liquid reservoirs are characterized by small matrix permeability that is several orders of magnitude lower than conventional oil reservoirs. The combination of multi-stage hydraulic fracturing and horizontal drilling has improved the overall profitability of these tight-oil reservoirs by enhancing the wellbore-matrix connectivity. Under primary production, however, the recovery factor remains in the range of only 5% to 10%. Considering such a large resource base, even small improvements in productivity could lead to billions of barrels of additional oil. Therefore, the need to develop a viable enhanced oil recovery technique for unconventional oil reservoirs is evident. This study investigates technical feasibility of carbon dioxide as an enhanced oil recovery agent for tight-oil reservoirs. Above minimum miscibility pressure (MMP), CO2 and oil are miscible leading to reduction in capillary forces and therefore high local displacement efficiency. The miscibility pressure of CO2 is also significantly lower than the pressure required for other gases, which makes CO2 miscible injection attainable under a broad spectrum of reservoir pressures. The coreflood experiments recovered more than 70% of the original oil from a Bakken core sample with an average porosity of 7.5% and permeability of 1.8 µd. CT scans at dual energies were used as an additional tool to visualize fluid flow and distribution at core level. We discovered that the impact of CO2 penetration is better captured at a lower energy level where the X-ray attenuation mechanism of photoelectric absorption becomes dominant. There is another interesting observation that is different from what we have anticipated: the change in CT number is greater during the earlier period of production than the later period. Possible explanations include 1) miscibility may have not been fully achieved early on in the production, 2) lighter hydrocarbon components are preferentially produced with CO2, leaving behind heavier components with denser properties. To decipher the oil recovery mechanisms in the coreflood experiment, a numerical compositional model was constructed to reproduce the laboratory results. Vaporization of light hydrocarbon components into CO2 is shown as a major recovery mechanism. Other controlling factors include re-pressurization, oil swelling, viscosity and interfacial tension reduction. History matching with the laboratory experiment introduces additional complexities such as rock heterogeneities and presence of a fracture that promotes flow perpendicular to the core length. The above issues need to be addressed in order to match the displacement process exactly.
Description
| Type of resource | text |
|---|---|
| Date created | June 2016 |
Creators/Contributors
| Author | Zhang, Ke |
|---|---|
| Primary advisor | Kovscek, Anthony R. |
| Degree granting institution | Stanford University, Department of Energy Resources Engineering |
Subjects
| Subject | School of Earth Energy & Environmental Sciences |
|---|---|
| Genre | Thesis |
Bibliographic information
Access conditions
- Use and reproduction
- User agrees that, where applicable, content will not be used to identify or to otherwise infringe the privacy or confidentiality rights of individuals. Content distributed via the Stanford Digital Repository may be subject to additional license and use restrictions applied by the depositor.
Preferred citation
- Preferred Citation
- Zhang, Ke. (2016). Experimental and Numerical Investigation of Oil Recovery from Bakken by Miscible CO2 Injection. Stanford Digital Repository. Available at: https://purl.stanford.edu/ns232bt0013
Collection
Master's Theses, Doerr School of Sustainability
View other items in this collection in SearchWorksContact information
- Contact
- brannerlibrary@stanford.edu
Also listed in
Loading usage metrics...