Vegetation Types: San Francisco Bay Area, California, 2006

Same as cln_veg except only has the coarse filter vegetation type. It is not combined with the landscape unit or protected lands. This is the vegetation dataset created specifically for the Upland Habitat Goals Project. The coarse filter vegetation targets were generated from this dataset. For a full description of the development of the coarse filter vegetation map along with helpful maps and graphics, see chapter 5 (Coars Filter and Vegetation Representation Analysis) in the final report. The first challenge faced by the Vegetation Focus Team was the lack of a consistent vegetation map covering the region. The team's preferred vegetation classification system was Manual of California Vegetation (Sawyer et.al. 2009) (MCV) because of the detail it provides. But, only a few areas within the Upland Habitat Goals Study Area have been mapped using MCV. An alternative vegetation classification system developed by the US Forest Service, CalVeg, covers almost the entire region but has some spatial inaccuracies and lacks sufficient detail for annual grasslands, shrub communities, riparian corridors, and isolated wetlands. The Vegetation Focus Team agreed to use a modified version of CalVeg, referred to as the Upland Habitat Goals Coarse Filter Vegetation Map, which provided adequate and consistent coverage for the full study area. The Coarse Filter Vegetation Map is a composite of several data sources: 1. The USDA Forest Service CalVeg Vegetation Map (CalVeg). CalVeg is the primary source of the vegetation data. 2. The Nature Conservancy's Composite Vegetation Map (TNC Composite). Developed by the Nature Conservancy for the Central Coast Ecoregional Plan, this composite of the California Department of Forestry Hardwoods and GAP (Holland 1986) was used to fill in two gaps in coverage by CalVeg. 3. The California Department of Forestry and Fire Multi-Source Vegetation Map (CDF Multi-Source). This composite of the California Department of Forestry Hardwoods, the Department of Conservation Farmland Mapping and Monitoring Program (FMMP), and the Department of Fish and Game California Vernal Pool Assessment was used to fill in a gap in CalVeg coverage in the Suisun Marsh region of Solano County. Starting with this composite vegetation map, the team made two primary enhancements. First, a serpentine geology layer from the USDA Natural Resources Conservation Service (NRCS) State Soil Geographic (STATSGO) Database was added to capture the unique vegetation types found on serpentine soils. Second, a climatic stratification was used to differentiate the approximately one million acres identified as Annual Grasslands in CalVeg. These grasslands were separated into Cool, Moderate, Warm, and Hot Grasslands based on July maximum temperatures established by PRISM (800-meter scale Parameter-elevation Regressions on Independent Slopes Model), a climate mapping system developed at Oregon State University. Figure 5.2 illustrates these temperature stratifications. Riparian Vegetation Riparian areas pose special challenges at the regional scale of the Upland Habitat Goals Project. While the Coarse Filter Vegetation Map captures the larger patches of riparian forests as mapped by CalVeg, it misses the many narrow ribbons of remnant riparian habitat. It also fails to capture the complex mix of local and watershed-scale processes operating in riparian areas, which are critical to biodiversity for all species groups. To capture these smaller riparian areas, the USGS National Hydrologic Database (NHD) was used in the fine filter process to define stream corridors with riparian habitat potential; the streams are included in the final Conservation Lands Network. Converted Lands The last step in the development of the Coarse Filter Vegetation Map added the Farmland Mapping and Monitoring Program (FMMP) Urban and Cultivated Agricultural data, and identified rural residential parcels less than 10 acres. Appendix B: Chapter 5 describes how the Rural Residential 10 data layer was created. The FMMP data was more current (2008) than similar land use types in CalVeg, and rural residential parcels are typically found on the urban fringe and of lower conservation suitability. Collectively, these areas are referred to as "Converted Lands" and are illustrated in Figure 5.3. Converted Lands were occasionally selected by Marxan for inclusion in the Conservation Lands Network if they contained conservation targets needed to meet the 90%, 75%, or 50% goals, or the 247-acre hexagon included 10% or more of protected lands. As noted in Chapter 4, lands over-selected by Marxan were removed except for the location of the target. Riparian Vegetation Riparian areas pose special challenges at the regional scale of the Upland Habitat Goals Project. While the Coarse Filter Vegetation Map captures the larger patches of riparian forests as mapped by CalVeg, it misses the many narrow ribbons of remnant riparian habitat. It also fails to capture the complex mix of local and watershed-scale processes operating in riparian areas, which are critical to biodiversity for all species groups. To capture these smaller riparian areas, the USGS National Hydrologic Database (NHD) was used in the fine filter process to define stream corridors with riparian habitat potential; the streams are included in the final Conservation Lands Network. Converted Lands The last step in the development of the Coarse Filter Vegetation Map added the Farmland Mapping and Monitoring Program (FMMP) Urban and Cultivated Agricultural data, and identified rural residential parcels less than 10 acres. Appendix B: Chapter 5 describes how the Rural Residential 10 data layer was created. The FMMP data was more current (2008) than similar land use types in CalVeg, and rural residential parcels are typically found on the urban fringe and of lower conservation suitability. Collectively, these areas are referred to as "Converted Lands" and are illustrated in Figure 5.3. Converted Lands were occasionally selected by Marxan for inclusion in the Conservation Lands Network if they contained conservation targets needed to meet the 90%, 75%, or 50% goals, or the 247-acre hexagon included 10% or more of protected lands. As noted in Chapter 4, lands over-selected by Marxan were removed except for the location of the target. Riparian Vegetation Riparian areas pose special challenges at the regional scale of the Upland Habitat Goals Project. While the Coarse Filter Vegetation Map captures the larger patches of riparian forests as mapped by CalVeg, it misses the many narrow ribbons of remnant riparian habitat. It also fails to capture the complex mix of local and watershed-scale processes operating in riparian areas, which are critical to biodiversity for all species groups. To capture these smaller riparian areas, the USGS National Hydrologic Database (NHD) was used in the fine filter process to define stream corridors with riparian habitat potential; the streams are included in the final Conservation Lands Network. Converted Lands The last step in the development of the Coarse Filter Vegetation Map added the Farmland Mapping and Monitoring Program (FMMP) Urban and Cultivated Agricultural data, and identified rural residential parcels less than 10 acres. Appendix B: Chapter 5 describes how the Rural Residential 10 data layer was created. The FMMP data was more current (2008) than similar land use types in CalVeg, and rural residential parcels are typically found on the urban fringe and of lower conservation suitability. Collectively, these areas are referred to as "Converted Lands" and are illustrated in Figure 5.3. Converted Lands were occasionally selected by Marxan for inclusion in the Conservation Lands Network if they contained conservation targets needed to meet the 90%, 75%, or 50% goals, or the 247-acre hexagon included 10% or more of protected lands. As noted in Chapter 4, lands over-selected by Marxan were removed except for the location of the target. Riparian Vegetation Riparian areas pose special challenges at the regional scale of the Upland Habitat Goals Project. While the Coarse Filter Vegetation Map captures the larger patches of riparian forests as mapped by CalVeg, it misses the many narrow ribbons of remnant riparian habitat. It also fails to capture the complex mix of local and watershed-scale processes operating in riparian areas, which are critical to biodiversity for all species groups. To capture these smaller riparian areas, the USGS National Hydrologic Database (NHD) was used in the fine filter process to define stream corridors with riparian habitat potential; the streams are included in the final Conservation Lands Network. Converted Lands The last step in the development of the Coarse Filter Vegetation Map added the Farmland Mapping and Monitoring Program (FMMP) Urban and Cultivated Agricultural data, and identified rural residential parcels less than 10 acres. Appendix B: Chapter 5 describes how the Rural Residential 10 data layer was created. The FMMP data was more current (2008) than similar land use types in CalVeg, and rural residential parcels are typically found on the urban fringe and of lower conservation suitability. Collectively, these areas are referred to as "Converted Lands" and are illustrated in Figure 5.3. Converted Lands were occasionally selected by Marxan for inclusion in the Conservation Lands Network if they contained conservation targets needed to meet the 90%, 75%, or 50% goals, or the 247-acre hexagon included 10% or more of protected lands. As noted in Chapter 4, lands over-selected by Marxan were removed except for the location of the target.

United States Department of Agriculture Forest Service Vegetation Classification and Mapping (CalVeg Mapping Zones): http://www.fs.usda.gov/detail/r5/landmanagement/resourcemanagement/?cid=stelprdb5347192

The Nature Conservancy Landfire data: http://www.landfiredataviewer.tnc.org/

California Fire Resource and Assessment Program data (FVEG): http://frap.cdf.ca.gov/data/frapgisdata-subset.php